ViCare Radiator Thermostat: Operating the device

Adding a ViCare Radiator Thermostat
With ViCare Smart Climate, you can add a second and additional thermostats in both existing and new rooms within the same ViCare Smart Climate system after the first setup. Read here how to add a new room via the ViCare app.

How to add a new ViCare Radiator Thermostat:

• Under “Settings” in the ViCare app, select “ViCare Smart Climate”.
• Tap on the “Add device” button.
• Select “ViCare Thermostat”.
• Select an existing room or create a new room in which you want to set up the device. To do this, click on “Add new room”.
• Select the heating circuit according to the number of heating circuits operated by the heating device. If only one heating circuit is active, this screen will not appear. If you are using the standalone version of ViCare Smart Climate, this screen will not appear either.
• Follow the further instructions in the app.

Teach-in process (in conjunction with Viessmann One Base or Vitoconnect OPTO2)

• Open “Settings” in the ViCare app and tap on “Single Room Control”. Follow the instructions in the app.
• Scan the access code (QR code) A on the thermostat.
• Now start the teach-in process:
  Briefly press the operating button B.  flashes.
  The display shows:
  
  • If teach-in is successful:  lights up permanently and “--” flashes. The installation mode is active.
  • If teach-in failed: E7 is displayed. Repeat the teach-in process.
  • Close the thermostat and set the desired room temperature setpoint by turning the thermostat head C.
    
    Please note: The teach-in process is only possible in installation mode. If the thermostat is not in installation mode, press the operating button B for approx. 3 seconds until “--” is displayed.
    
    For installations without a gateway the teach-in process is not necessary.

Assigning the ViCare Radiator Thermostat to another room
With ViCare Smart Climate, you can transfer the ViCare thermostat to another room that already exists in the same installation.

How to transfer a thermostat to another room:

• Select “ViCare Smart Climate” under “Settings” in the ViCare app.
• Select the room from which the device is to be transferred.
• Then select the device to be transferred by clicking on the corresponding device in the “Connected devices” list.
• Tap the “Room” button again. This opens the menu in which you can select the future room for the component.
• Confirm the selection by tapping on “Save”. The component is now transferred and deleted from the original room.

Disconnecting the ViCare Radiator Thermostat
With ViCare Smart Climate, you can remove the ViCare thermostat from the ViCare Smart Climate system at any time by disconnecting it.

To remove a thermostat:

• Select “ViCare Smart Climate” under “Settings” in the ViCare app.
• Select the room from which the device is to be removed.
• Select the device to be removed by clicking on the corresponding device in the “Connected devices” list.
• Tap on “Disconnect”.
• Confirm the process. The device is removed from ViCare Smart Climate.