ViCare Floor Heating Controller: Restore factory settings
Installation & operating instructions
Note: After reset to the delivery condition, bringing the ViCare Floor Heating Controller back into operation will require the support of the Viessmann technician to reconnect the device with the ViCare Smart Climate system.
The reset to delivery condition (factory settings reset) of the ViCare Floor Heating Controller can be done by using factory reset function. The following assignments will be erased:
The connection to the gateway is removed
All error messages and settings are reset
To perform factory reset do as follow:
Step 1. Remove the cover.
Step 2. Press button T2 with a pointed object (e.g. paper clip) and hold it down for at least 5 seconds. Release the button.
Step 3. Close the cover.
