ViCare Radiator Thermostat: Mounting instructions
Installation & operating instructions
The individual steps for mounting your new ViCare Radiator Thermostat are as follows:
1. Before removing the previous radiator actuator, the valve must be wide open. To do this, turn the actuator to the highest position.
2. Fit the connection adapter to the thermostatic valve. You can find out which adapter is the right one here.
3. Open the ViCare radiator thermostat and insert the batteries (2 x 1.5V LR6 type AA, no rechargeable batteries). “- -” appears on the display. This indicates the delivery status. Installation mode is active.
4. Mount the thermostat firmly on the connection adapter by turning it to the right (clockwise).
5. Turn the thermostat to the left (counterclockwise) and align the display A as required.
6. Press button B for at least 3 seconds to close the thermostatic valve. The room temperature setpoint is shown on the display.
7. Set the desired room temperature setpoint by turning the thermostatic head C.
The ViCare thermostat can now be added to the Viessmann cloud infrastructure (put into operation).
