ViCare Climate Sensor: Teaching process

Before you can put the ViCare Climate Sensor into operation, you must program it. To do this, follow these steps:

• Remove the ViCare Climate Sensor from the wall.
• Open the ViCare app.
• Click on “ViCare Smart Climate” in the “Settings” area. Follow the further instructions in the app.
• Scan the QR code D on the back of the ViCare Climate Sensor with your mobile device.
• Confirm the teach-in process by briefly pressing the operating button C.
• The teach-in process can take up to 3 minutes. During this time, the status LED flashes green. If the teach-in process was successful, the status LED lights up green for approx. 5 seconds. The successful connection is displayed in the ViCare app.
• Attach the ViCare Climate Sensor to the wall again.

A   Status LED
B   This is where the temperature and humidity measurement is taking place. Do not cover!
C   Control button
D   QR code

Please note: If the device was already registered as a ViCare wireless repeater, i.e. with a plug-in power supply unit, you must first reset it to the factory setting. You can find out how to do this here. You must then reprogram the device with the ViCare app as described above.