ViCare Climate Sensor: Commissioning and operating

Adding a ViCare Climate Sensor
With ViCare Smart Climate, you can add a ViCare Climate Sensor to both existing and new rooms within the same installation. You can read how to add a new room via the ViCare app here.

How to commission a new ViCare Climate Sensor:

1. Under “Settings” in the ViCare app, select “ViCare Smart Climate”.
2. Tap on the “Add device” button.
3. Select “ViCare Climate Sensor”.
4. Select an existing room or create a new room in which you want to set up the device. To do this, click on “Add new room”.
5. Follow the instructions in the app and insert the battery (3 V CR2450).

After commissioning the ViCare Climate Sensor and pairing it with the desired room, the data measured by the device is displayed on the ViCare dashboard. If you click on the room tile in the ViCare app dashboard, you will also find the humidity value next to the measured temperature in the room view.

Assigning the ViCare Climate Sensor to another room
With ViCare Smart Climate, you can transfer the device to another room that already exists in the same Smart Climate installation.

To transfer a climate sensor to another room:

1. Select “ViCare Smart Climate” under “Settings” in the ViCare app.
2. Select the room from which the device is to be transferred.
3. Then select the device to be transferred by clicking on the corresponding device in the “Connected devices” list.
4. Tap the “Room” button again. This opens the menu in which you can select the future room for the component.
5. Confirm the selection by tapping on “Save”. The component is now transferred and deleted from the original room.

Disconnecting the ViCare Climate Sensor
With ViCare Smart Climate, you can remove the ViCare climate sensor from the ViCare Smart Climate system at any time by disconnecting it.

To remove a climate sensor:

1. Select “ViCare Smart Climate” under “Settings” in the ViCare app.
2. Select the room from which the device is to be removed.
3. Select the device to be removed by clicking on the corresponding device in the “Connected devices” list.
4. Tap on “Disconnect”.
5. Confirm the process. The device is removed from ViCare Smart Climate.